ZSPCD Hammer crusher_Stone Crusher Machine_Henan Greatwall Machinery Co.,Ltd

Product Introduction

PCD series Series Hammer Crusher (Hammer Crusher) developed and produced by GreatWall Machinery is a complete crusher with one machine for crushing and shaping, which is suitable for crushing various medium and hard materials such as limestone with compressive strength not exceeding 150MPa and calcium content higher than 40%. It has the characteristics of a special structure, easy operation, energy saving, good grain shape, adjustable discharge particle size, cost saving, etc. Hammer crusher and impact crusher shape and structure are almost the same, the difference only lies in the form of the rotor. The rotor of the hammer crusher uses independent hammers, which can rotate around the hammer shaft. The rotor of the impact crusher uses a high chromium plate hammer. The single hammer crusher has a large weight, reasonable rotor speed, and large moment of inertia of the hammer, which can achieve the crushing effect of large feeding particle size and small discharging particle size.

Product Features

Large feed granularity (larger up to 1200mm), large crushing ratio and high output (the output of a single machine can reach 2500 tons);
The finished product has a uniform grain shape, few flakes and low powder yield, which meets the standard of excellent sand and gravel aggregate.
The hammer head is made of high chromium alloy, which is more than 1 time longer than the life of ordinary high-strength alloy hammer head;
A practical sheath is installed around the rotor disk to avoid direct wear between the stone and rotor disk, which greatly improves the service life of the rotor.

Product Parametersа

Model	Rotor diameter(mm)	Max Feed Size (mm)	Capacity(t/h)	Power(kw)
ZSPCD1308	1310×790	600	100-160	132
ZSPCD1512	1500×1160	750	250-320	320
ZSPCD1615	1650×1452	1000	420-500	400
ZSPCD1620	1660×1900	1200	800-1000	800
ZSPCD1820	1800×1964	1200	1000-1200	900
ZSPCD2125	2100×2486	1600	2000-2500	1250